Other Problems - Getac V110 User Manual

I cannot communicate with the computer in the network when
Infrastructure mode is configured.
Make sure that the Access Point your computer is associated with is

powered on and all the LEDs are working properly.
If the operating radio channel is in poor quality, change the Access Point

and all the wireless station(s) within the BSSID to another radio channel.
Your computer may be in an out-of-range situation. Move your

computer closer to the Access Point it is associated with.
Make sure that your computer is configured with the same security

option (encryption) to the Access Point.
Use the Web Manager/Telnet of the Access Point to check whether it is

connected to the network.
Reconfigure and reset the Access Point.

I cannot access the network.
Make sure that the network configuration is appropriate.

Make sure that the user name or password is correct.

You have moved out of range of the network.

Turn off power management.


Other Problems

The date/time is incorrect.
Correct the date and time via the operating system or BIOS Setup

program.
After you have performed everything as described above and still have

the incorrect date and time every time you turn on the computer, the
RTC (Real-Time Clock) battery is at the end of its life. Call an authorized
dealer to replace the RTC battery.
8-10
Troubleshooting