Replacing The Battery Pack - Getac V110 User Manual

Replacing the Battery Pack

CAUTION:
There is danger of explosion if the battery is incorrectly replaced.

Replace the battery only with the computer manufacturer's battery
packs. Discard used batteries according to the dealer's instructions.
Do not attempt to disassemble the battery pack.

NOTE: You can hot swap one battery pack while the other one is supplying
the power.
To replace the battery pack, follow these steps:
1. Depending on which battery pack (
side) you want to replace, open the respective cover.
Slide the cover latch toward the unlocked position ( ) (
up the tab (
2. Hold the battery latch and slide it toward the right to unlock.
3-6
Managing Power

) to release the cover.
(Battery 1 as the example)
(Battery 1 as the example)
on the left side or on the right

) and then lift