When And How To Use - Getac S410 Series User Manual

When and How to Use

You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS

Setup Utility.
You want to restore the factory default BIOS settings.

You want to modify some specific settings according to the hardware.

You want to modify some specific settings to optimize the system

performance.
To run BIOS Setup Utility:
1. Go to Settings  Update & security  Recovery (for Windows 10) or
Settings  System  Recovery (for Windows 11). Under Advanced
startup, select Restart now. In the boot options menu, select Troubleshoot
 Advanced options  UEFI Firmware Settings. Select Restart. In the
next menu that appears, use the arrow key to select Setup Utility and
press Enter.
2. The BIOS Setup Utility main screen appears.
In general, you can use the arrow keys to move around and F5/F6 keys
to change the setup values. Keyboard information can be found at the
bottom of the screen.
NOTE:
The actual setting items on your model may differ from those described

in this chapter.
The availability of some setting items depends on the configuration of

your computer.
59