Hardware Device Problems; Keyboard And Touchpad Problems - Getac V110 User Manual

Hardware Device Problems

The computer does not recognize a newly installed device.
The device may not be correctly configured in the BIOS Setup program.

Run the BIOS Setup program to identify the new type.
Make sure if any device driver needs to be installed. (Refer to the

documentation that came with the device.)
Make sure if the device needs any jumper or switch settings. (Refer to the

documentation that came with the device.)
Check the cables or power cords for correct connections.

For an external device that has its own power switch, make sure that the

power is turned on.

Keyboard and Touchpad Problems

The keyboard does not respond.
Try connecting an external keyboard. If it works, contact an authorized

dealer, as the internal keyboard cable might be loose.
Water or liquid is spilt into the keyboard.
Immediately turn off the computer and unplug the AC adapter. Then

turn the keyboard upside down to drain the liquid out of the keyboard.
Make sure to clean up any part of the spill you can get to. Though the
keyboard of your computer is spill-proof, liquid will remain in the
keyboard enclosure if you don't remove it.
The touchpad does not work, or the pointer is difficult to control
with the touchpad.
Make sure that the touchpad is clean.

8-5
Troubleshooting