Locate; Signal Led - DeLorme inReach User Manual

Two-way satellite communicator with gps for android/for earthmate pn-60w

Hide thumbs Also See for inReach:

Table of Contents

Locate

Anyone who has your explore.delorme.com account login information can send a tracking point request from the

website to the inReach to determine the location of the inReach. When the inReach receives the request, it sends

a tracking point (a total of two tracking points are used). If you are using the inReach as a standalone device, your

inReach will automatically respond. If you are using the inReach with your PN-60w or Android phone, you will be

notified of the request. See the Help on explore.delorme.com for more information.

The Signal LED indicates the status of the connection between the inReach and the GPS or Iridium satellites. Green

flashes indicate that messages or tracking points are being sent. Red flashes indicate that you don't have a good signal

and messages or tracking points aren't being sent.

• The Signal LED flashes green once every three seconds when the inReach is sending a message of any type.

The LED will stop flashing when the message is sent, unless the inReach is tracking in standalone mode. When

tracking in standalone mode, the Signal LED flashes continuously to indicate the status of the GPS satellites.

• The Signal LED flashes red once every three seconds when the inReach is having trouble sending or confirming

a message. The Signal LED will flash red until the message is successfully transmitted or cancelled. If the LED is

flashing red, try moving to a new location to get a better view of the satellites.

DeLorme inReach User Manual | Using the inReach as a Standalone Device

Table of Contents