DeLorme inReach User Manual page 11

To send a new message
1. From the inReach Page, select Messages, and then select New Message.
2. With the address text box highlighted, press ENTER to open the keyboard.
Start entering a name. Matches from your contact list will appear. Select OK to add the name shown or to see all
possible matches when multiple matches exist, and then select the address to use. Select OK to enter another
address. Select OK twice to exit.
OR
Enter the entire email address or mobile phone number and press ENTER. An address that has not been synced
from explore.delorme.com to the PN-60w is subtracted from the 160-character composed message allotment.
Select OK to enter another address. Select OK twice to confirm the addresses.
OR
Select the address book to the right of the text box and scroll through your contacts. To select a contact, highlight
it and press ENTER. Press QUIT to exit the list.
3. To select a Quick Text message that you synced from explore.delorme.com, select the Compose Text
Message drop-down list and select the message.
OR
To type a new message, select Type message here and press ENTER. Then, type the message. The number of
characters remaining displays in the Compose Message area.
4. Select Send.
To reply to a conversation
1. From the inReach Page, select Messages.
2. Select the conversation that you want to reply to. Select Reply, and then enter your message.
3. Select Send.
Sent Messages
The message sending icon displays until the message is sent. If the failed message icon
not been sent. Make sure the PN-60w and inReach are connected and that you have a clear view of the sky. Attempts
to send a failed message will continue until you have a good signal. If after 15 minutes the message has not been sent,
you will be prompted to continue sending or cancel the message.
On the inReach, the Signal and Message LEDs flash green if the message is sending successfully and red if it is not.
10 Using the inReach with a PN-60w | DeLorme inReach User Manual
appears, the message has