DeLorme inReach User Manual page 15

4. A default message is available, but, if possible, type a message providing details about your emergency.
5. Select Send SOS. The countdown timer displays for 10 seconds. To cancel the SOS before it's sent, press QUIT.
6. The SOS conversation thread will appear. Select Reply to send another message to GEOS or to respond to them.
Note If you do not have a clear view of the sky, the SOS messages will be stored and then sent as you have a good
signal. The Signal LED will flash green when messages are being sent; it will flash red when you do not have a good
signal.
To cancel an SOS message
Select Cancel SOS. This sends a message to GEOS to let them know that the emergency has been resolved and
assistance is no longer needed. The SOS message thread will close once the cancellation has been processed. On the
inReach, the Signal and Message LEDs flash until the cancellation message has finished sending; do not power off the
inReach until the Signal and Message LEDs stop flashing.
You can also cancel the SOS on the inReach; see page 6 for more information.
IMPORTANT! You must cancel SOS to stop GEOS from sending help. Turning off the inReach device (or a connected
Android phone or PN-60w) or taking out the batteries will NOT tell GEOS to stop the rescue. If you replace the
batteries when an SOS is in progress, press and hold the SOS button again to update your location.
For more information about GEOS, visit geosalliance.com.
Addresses
The address book displays a list of contacts you have synced from explore.delorme.com as well as any contacts you
add to the address book on the PN-60w. Note that contacts you add or delete or edits you make on the PN-60w are
not synced back to explore.delorme.com—you should update explore.delorme.com with any changes you make on
your device that you want to keep and then sync again.
You cannot add, edit, or delete Facebook, Twitter, or MapShare contacts on the PN-60w. You must add them to
explore.delorme.com and sync them to the device.
To view a contact's details
From the inReach Page, select Addresses, and then select the contact.
To add a contact
1. From the inReach Page, select Addresses, and then select New Contact.
2. Complete the contact's information by selecting each field to open the on-screen keyboard.
3. To add fields, press MENU, select Add additional fields, and select the type of field to add. Then, enter the
information.
4. Press QUIT to exit.
To edit a contact
1. From the inReach Page, select Addresses, and then select the contact to view its details.
2. Select the field to edit OR to add a field, press MENU, select Add additional fields, and select the type of field to
add. Then, enter the information.
3. Press QUIT to exit.
To delete a contact
1. From the inReach Page, select Addresses, and then select the contact.
2. Go to MENU > Delete contact.
14 Using the inReach with a PN-60w | DeLorme inReach User Manual