Inreach Leds; Messages - DeLorme inReach User Manual

Two-way satellite communicator with gps for android/for earthmate pn-60w

Hide thumbs Also See for inReach:

Table of Contents

Note You will be prompted to install the DeLorme GPS Browser Plugin the first time you sync. During the initial

process, you will need to close your browser.

inReach LEDs

The inReach LEDs reflect what you are doing on the PN-60w inReach Page. See Using the inReach as a Standalone

Device on page 5 for more information.

The Messages page displays a list of conversations. The number of unread messages is indicated in the page header

and the conversations with unread messages are indicated with a green dot. All sent and received messages are

available at explore.delorme.com and on the History page on the device. See History on page 15 for more

information.

Messages that you send and receive while the inReach and PN-60w are connected are displayed on the PN-60w

Map Page. To view the message details from the map, use the arrow keypad to pan to the message icon and press

ENTER.

Create Messages

Create messages (of up to 160 characters) and send them to the contacts that you synced from explore.delorme.

com or add new addresses directly to the PN-60w.

• The predefined Quick Text messages you set up at explore.delorme.com and synced to your PN-60w are

available in the drop-down list on the Compose Message page, or you can create a new message.

• Post to Facebook and Twitter. Link your accounts at explore.delorme.com—Facebook and Twitter will appear in

your address book and each has its own conversation thread. You can post to your own Facebook wall or Twitter

account; you will not receive comments or replies on the PN-60w.

• Post messages to your MapShare page. You must first set up MapShare on explore.delorme.com and sync your

PN-60w. MapShare will appear in your address book and it has its own conversation thread.

• Create messages on your PN-60w when you aren't connected to your inReach. When you are connected, the

message will be sent.

• On the inReach, the Signal and Message LEDs flash green if the message is sending successfully and red if it is

not.

DeLorme inReach User Manual | Using the inReach with a PN-60w

Table of Contents