Table of Contents
Advertisement
Mounting the Camera
Selecting a mounting method
Mounting the camera directly to the ceiling or on the wall (Refer to
below)
Mounting the Camera Using the Conduit Hole at the Bottom of the
Base (A page 30)
Mounting the Camera Using the Conduit Hole at the Side of the Base
(A page 32)
Mounting the Camera using the Electrical Box (A page 33)
Memo When mounting the camera to the ceiling, ensure to wear
safety glasses to protect the eye from any falling objects.
Mounting the camera directly to the ceiling or on the wall
When mounting to a wall, replace areas indicated as "ceiling" in the
procedures by "wall".
Preparing the camera
1 Remove the dome cover (screws x3)
2 Remove the inner dome from the catches (two locations)
The inner dome can be easily removed by turning it about 45 degree
and grip from both sides near the catches as illustrated in the diagram.
1
2
.
Dome cover
Wrench (supplied)
Inner dome
Catches (x2)
Fall prevention wire
Installation
E-23
Advertisement
Table of Contents
