Connecting the cable
For safety reasons, turn on the power only after all the connection is
complete. The status indicator lights up when the camera is turned on.
1 Connect the coaxial cable (A page 18)
Lower the protection cover and connect the connectors.
Upon connecting, restore the protection cover to cover the connectors.
This will isolate and protect the metallic parts of the connectors.
2 Connect the power supply cable (A page 20)
3 Wrap insulation tapes around the connecting parts of the power
supply cables
Memo Wrapping insulation tapes will improve future work conditions,
as well as reduce penetration by noise and other objects.
4 Wrap the insulation tape
5 Push the connector of the connected coaxial cable back to the
ceiling
Protection
cover
.
2
1
Power supply cable / Alarm cable
Coaxial cable
3
Solder or caulk
Insulating tape
4
Bind insulating tape
Installation
E-25