Installation And Connections; Before You Begin; Unpack Everything; Equipment Required - JVC VN-T16U Instructions Manual

3 Installation and Connections

Before You Begin

Unpack Everything

Equipment Required

Operating Precautions

Do not install the camera in following places.

In a place exposed to rain or moisture.

In a place with vapor or oil, for example in a kitchen.

When the ambient temperature rises above or falls below the acceptable range (from -10°C to

50 °C.
In a place at which corrosive gases are emitted.

Near a source of radiation, X-rays, strong radio waves or magnetism.

In a place subject to vibration.

In a place with excessive dirt.

Maintenance

Wipe the camera with a dry, soft cloth to remove any dirt. Do not use benzene or thinner to wipe the
camera. Doing so may melt the surface or cause it to fog. For tough stains, wipe with a neutral de-
tergent diluted with water, followed by wiping with a dry cloth.
This chapter describes the installation and connection of the Box Camera.
Please read this INSTRUCTIONS carefully before you install and operate the
camera.

HD IP Camera

WARRANTY CARD

SAFETY PRECAUTIONS

QUICK GUIDE

8-PIN TERMINAL BLOCK for alarm input/output

CD-ROM containing INSTRUCTIONS and IP Finder software
The following tools might help you to complete the installation:

Drill

Screwdrivers

Wire cutters
8