Table of Contents
Advertisement
5 Fine adjust the focus
① Press and hold the [J] button.
Focus adjust mode will be activated and "FOCUS ADJUST MODE"
is displayed on the monitor screen.
The contours are emphasized as the iris opens and the depth of
field becomes shallow.
After adjustment, press [ K, H, I] / [SET]/[MENU] to exit focus
adjust mode. The mode is also automatically deactivated after
about 30 seconds.
Memo
② Shoot the subject.
③ Confirm that the catch is at position A in the diagram, and then
rotate the knob to adjust the focus to the optimum position.
④ Rotate the gear for focus adjustment knob approximately one gear
tooth in the direction of the arrow in the diagram to correct the
focus shift when mounting the dome cover.
⑤ Peel off the protection sheet temporarily and cover the dome cover
to check the focus. After checking, paste the protection sheet back
on the dome cover.
Gear tooth
During the focus adjust mode, the electronic shutter will
function automatically. As a result the screen will
appear grainy. This is not a malfunction.
Knob
<IR LED removed>
.
Catch
A
<Continued on the following page>
Adjustment
E-37
Advertisement
Table of Contents
