Table of Contents
Advertisement
Recording the distant subjects
Below settings are recommended when the subject in the distance
needs to be captured brightly.
Menu Setting
[SENSE UP]
[AGC]
[ALC PRIORITY]
Confirm that the black and white images (IR LED light on) is
Memo
selected if setting is in progress while viewing the images.
To set the black and white images (IR LED light on), set the
[IR LED MODE] to "ON", and perform either of the following:
- Set "AUTO" in [D/N MODE], and darken the surrounding.
- Set "B&W" in [D/N MODE].
Adjusting brightness while IR LED is lit
(brightness adjustment in B&W Av:Pk)
Make necessary adjustments when the images are difficult to see due
to the screen being too white or too dark in the black-and-white mode.
Setting values
Decrease the
setting to 6:4, etc
Increase the
setting to 10:0, etc.
Confirm that the black and white images (IR LED light on) is
Memo
selected if setting up is in progress while viewing the
images. To set the black and white images (IR LED light on),
set the [IR LED MODE] to "ON", and perform either of the
following:
- Set "AUTO" in [D/N MODE], and darken the surrounding.
- Set "B&W" in [D/N MODE].
Recommended Setting Values
x2
HIGH
PICTURE
Intended improvements
When it is difficult to see the nearby subject
since it looks too white (Need to improve
overexposure of the subject)
When the background images are too dark to
collapse the overall images (Need to avoid the
overall images to look dark)
Setting Examples
E-59
Advertisement
Table of Contents
