: Indicates a reference page or item. Contents of this manual JVC KENWOOD Corporation holds the copyright to this manual. Any part or all of this manual may not be reproduced without prior consent from the company. Design, specifications and other contents described in this manual are subject to change for improvements without prior notice.
AES LIMIT WIDE-D LEVEL VIDEO SETTINGS.. (A 9 page) LCD TYPE WB AREA COLOR LEVEL (COLOUR LEVEL) BLACK LEVEL AUTO BLACK ENHANCE LEVEL DNR LEVEL VIDEO EFFECT.. (A 10 page) D. ZOOM REVERSE MODE : TK-C9200U/TK-C9200E/TK-C9201EG only : TK-C9300U/TK-C9300E/TK-C9301EG only...
The Flow of Menu Screen PRIVACY MASK.. (A 10 page) BRIGHTNESS MASK No. 1 MASK No. 2 MASK No. 3 MASK No. 4 (A 11 page) MAINTENANCE.. CCD SPOT CORRECTION.. FACTORY SETTINGS.. (A 11 page) DAY/NIGHT.. D/N MODE AUTO LEVEL AUTO TIME MOTION DETECT (A 12 page)
Menu Setting Procedure Menu Setting Procedure 1 Press the [MENU] button. 2 Set the cursor (E) to a desired menu item with the [ J / K ] button. 3 Change the setting with the [ H / I ] button. When a setting has been changed, a change mark (Z) is displayed.
BASIC MENU WHITE BALANCE Screen This menu item allows to adjust camera white balance. [Setting values : ATW-N, ATW-W, AWC] (Default value: ATW-W) ATW-N : This is the ATW (Auto-Tracking White Balance) mode. The camera adjusts the white balance automatically according to the color temperature of the scene illumination (color temperature 3200 K to 8000 ATW-W: This mode supports a wider range of color temperature (color temperature 2300 K to 10000 K) than ATW-N.
BASIC MENU This item sets the AGC (Automatic Gain Control). [Setting values : OFF, MID, HIGH] (Default value: MID) Memo When set to "HIGH", the screen appears grainy in dark places. SENSE UP Electronic Sense Up is a function that provides higher sensitivity level by lengthening the exposure time.
ADVANCED MENU ALC SETTINGS Screen BRIGHTNESS Adjusts video signal brightness level. The larger the value, dark area becomes more visible. The smaller the value, bright area becomes more visible. [Setting values : -5 to NORMAL to 5] (Default value: NORMAL) BLC AREA Press the [SET] button to display the fixed photometry area.
(Default value: 1/50) [SHUTTER SPEED] can be set only when the [AES ON/OFF] switch is Memo set to "ON" and [SENSE UP] set to "OFF". (TK-C9200U/TK-C9200E/ TK-C9201EG only) [SHUTTER SPEED] can be set only when the [SENSE UP] set to "OFF".
ADVANCED MENU VIDEO SETTINGS Screen LCD TYPE Enables settings to be made according to preference when using a LCD (Liquid Crystal Display). [Setting values : TYPE1, TYPE2] (Default value: TYPE1) Memo When the MONITOR TYPE selector switch is set to "CRT", [LCD TYPE] does not work even if it is set.
Memo As the video is digitally processed when electronic zoom is used, picture quality may deteriorate slightly. REVERSE MODE(TK-C9300U/E, TK-C9301EG, TK-C9200U/E, TK-C9201EG) Enables the reverse mode to be set. When set to "ON", the image is inversed horizontally and vertically.
ADVANCED MENU MAINTENANCE Screen CCD SPOT CORRECTION Compensates for white spots on the CCD. Press the [SET] button to display the items for selection. [Items for selection : CANCEL, EXECUTE] CANCEL : Returns to the MAINTENANCE screen. EXECUTE : Executes white spot compensation on the CCD. Memo Attach the lens cap before executing white spot compensation on the CCD.
ADVANCED MENU MOTION DETECT Screen (TK-C9300U/E, TK-C9301EG) Motion Detect displays the alarm title and outputs an alarm signal when there are movements in the image. Alarm signal is output from the AUX terminal on the rear panel. DETECT LEVEL Sets the level to detect movements. The larger the value, the higher the sensitivity.
ADVANCED MENU AUX FUNCTION Screen (TK-C9300U/E, TK-C9301EG) AUX FUNCTION Sets the input/output signal of the AUX terminal. [Setting values : IN:ALARM, IN:D/N, OUT:ALARM, OUT:B&W] (Default value: IN:ALARM) IN:ALARM : Displays image on the monitor when alarm signal is input from the AUX terminal.
Setting Examples Memo When the [AUX FUNCTION] switch is set to "OUT:ALARM" or "OUT:B&W", [IN POLARITY] does not work even if it is set. OUT POLARITY Sets the polarity of the output alarm signal. [Setting values : MAKE (short), BREAK (open) (Default value: MAKE) Memo When the [AUX FUNCTION] switch is set to "IN:ALARM"...
Setting Examples Setting the Privacy Mask 1 Select the [ADVANCED MENU] item on the menu screen and press the [SET] button. 2 Select the [PRIVACY MASK] item with the [J/K] button and press the [SET] button. The PRIVACY MASK screen appears on the monitor. 3 Select the mask number with the [J/K] button and set "ON"/"OFF"...