Table of Contents
Advertisement
3 Adjust the shooting direction of the camera
Adjust the camera for pan, tilt and rotation, and face the camera
towards the subject.
Rotation: ±100 °
.
Rotate both pan ±175 ° and rotation ±100 ° from the
Memo
positions aligned with the camera's shooting direction mark,
pan center mark and rotation center mark. Be sure to hold
the rotation knob and adjust the rotation without holding the
lens unit.
Loosen the tilt fastening screw before performing tilt
adjustment.
After adjusting the field angle, tighten and secure the tilt
fastening screw so that the field angle will not be misaligned.
Pan: ±175 °
Tilt: ±80 °
Shooting direction
mark
Pan center mark
Rotation center mark
Rotation knob (x2)
<Continued on the following page>
Adjustment
Tilt fastening screw
E-35
Advertisement
Table of Contents
