Appendix 4 - System Upgrade Error Code; Appendix 5 - Map Of Screens (Remote Setup) - Eneo KBD-NSC-100 Installation And Operating Manual

APPENDIX 4
System Upgrade Error Code
When an error occurs during the software upgrade, refer to the following error code.
No. Description
0
Unknown error
1 File version error
3 Software version error
4
Kernel version error
101
The upgrade file is not found.
102
Extracting package failed.
105
Invalid package
300 Remote connection failed.
301 Remote network error
APPENDIX 5
Map of Screens (Remote Setup)
eneo is a registered trademark of Videor E. Hartig GmbH
®
Exclusive distribution through specialised trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8 · 633 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-00
www.videor.com
No. Description
302
Remote upgrade is not authorized.
303 Saving remote package failed.
304 Remote upgrade is cancelled by the user.
400
USB device mounting failed.
401
Reading upgrade package on the USB device failed.
402
Copying upgrade package on the USB device failed.
403
USB device is not connected.
404 USB device is currently in use.
405 The file system is not supported.
V. 1.0
Technical changes reserved.
© Copyright by VIDEOR E. Hartig GmbH 0/009
40