Table of Contents
Advertisement
Locking Buttons
Pressing the
and
menu or the INIT program when there is no action on the network keyboard during the preset time since the last action. This function does not work if the
User password is not set up or the button lock time is set to Never. Refer to Chapter 4 – LCD Menu Configuration, 4.3 Setup Menu, System or
Chapter 5 – Remote Configuration, 5.1 System for details on setting up the user password or button lock function.
The network keyboard does not receive any commands and any given commands are cancelled when the buttons are locked. Unlocking the buttons requires
entering the User password.
. Press the
. The buttons are locked. Press the
3. Press the user password and press the
4. The buttons are unlocked.
Cancelling Command
Pressing the
button after pressing an ID or number button cancels the entry and returns to the previous command, and pressing the
after pressing a command button cancels the command and returns to the default screen.
. Press the camera ID after selecting a monitor.
. Pressing the
3. Press the camera ID.
4. Press the
5. Video from the selected camera is displayed in the monitor. Pressing the
the default screen.
6. You can give a new command.
3.2 PTZ Camera Control
You can control PTZ cameras via RS-485 connection. Refer to Appendix 2 – Buttons for details on each control button.
. Press the camera ID. If you control the camera in the Basic mode, press the 485 ID instead of the camera ID.
. Press the
buttons together locks the buttons of the network keyboard. You can set up the buttons to be locked by using the LCD
and
button together.
button to unlock the buttons.
button cancels the entry and returns to the previous command.
button.
button. You can control the camera by using PTZ control buttons.
button.
RS-485
7
button cancels the command and returns to
button
Advertisement
Table of Contents
