Table of Contents
Advertisement
Go to the following menus: Setup –> Remote Setup –> Device –> Setup
5.
5.. Click Digital Video Recorder in the device list, and then the Add button to register
the DVR.
5.. Set up the registration information and click the OK button.
• ID: The network keyboard assigns the ID automatically when the DVR is
registered, and you can change the ID. The ID will be used to distinguish the DVR
from other devices when controlling the DVR by using a network keyboard, so
each device should have its own unique ID.
• Connection: Select RS-485 or Ethernet depending on the connection type.
− RS485: Enter the DVR's system ID set in the DVR if the DVR is connected to the
network keyboard via RS-485 connection. You have to change the DVR's
system ID in the DVR if the system ID is in use in more than one DVR or set to
„0." The system ID will be used to distinguish the DVR from other DVRs when
controlling it by using a network keyboard, so each DVR should have its own
unique system ID.
− Ethernet: Enter the IP address, port numbers (Control Port: Watch port), user
ID and password for the connection to the DVR if the DVR is connected to a
network. The user ID and password is for the connection to the DVR and you
can use any user ID and password registered on the DVR. It is required to
log in a user with the authority over the function to control depending on the
function when controlling the DVR.
5.3. Click the Digital Video Recorder pull-down menu in the device list, and then the
registered DVR's pull-down menu. A list of monitors and cameras supported in the
DVR is displayed.
•
[ID] Main Monitor: Displays the monitor ID and type.
•
[ID] Spot Monitor No.: Displays the monitor ID, monitor type and the Spot
Out number of the DVR.
[ID] „Camera Name": Displays the ID and name of the camera.
•
5.4. Click a monitor or a camera in the list, and then the Edit button. Set up the monitor
or camera information.
• ID: The network keyboard assigns the ID automatically when the DVR is
registered, and you can change the ID. The ID will be used to distinguish the
monitor or camera from other monitors or cameras when controlling it by using a
network keyboard, so each monitor or camera should have its own unique ID.
• Type: Set up the camera type.
− Fixed: Select if the camera is not a PTZ camera.
− PTZ Camera: Select if the camera is a PTZ camera.
Advertisement
Table of Contents
