Table of Contents
Advertisement
Safety Instructions / Maintenance
• Read these safety instructions and the operation manual first before you install and commission the unit.
• Keep the manual in a safe place for later reference.
• The system may only be commissioned and maintained by personnel authorized to do this and it must only be carried out in accordance with relevant
standards and guidelines.
• Protect your unit from contamination with water and humidity to prevent it from permanent damage. Never switch the unit on when it gets wet.
Have it checked at an authorized service center in this case.
• Never operate the units outside of the specifications as this may prevent their functioning.
• Do not operate the unit beyond their specified temperature, humidity or power ratings. Operate the unit only at a temperature range of 0°C to +50°C
and at a humidity of max. 80%.
• The unit should be protected against excessive heat, dust, damp and vibration.
• To disconnect the power cord of the unit, pull it out by the plug. Never pull the cord itself.
• Pay attention when laying the connection cable and observe that the cable is not subject to heavy loads, kinks, or damage and no moisture can get in.
Do not attempt to disassemble the camera board from the dome.
• Contact your local dealer in case of malfunction.
• Maintenance and repair have to be carried out only by authorized service centers.
Before opening the cover disconnect the unit from mains input.
• The warranty becomes void if repairs are undertaken by unauthorized persons. Do not open the housing.
• The connection cable should only be changed by Videor E. Hartig GmbH.
• Only use original parts and original accessories from Videor E. Hartig GmbH.
• Do not use strong or abrasive detergents when cleaning the dome. Use a dry cloth to clean the dome surface. In case the dirt is hard to remove, use a mild
detergent and wipe gently.
NOTE: This is a class A digital device.
This digital device can cause harmful interference in a residential area; in this case the user may be required to take appropriate corrective
action at his/her own expense.
1. Introduction
1.1 Features
This network keyboard controls Multifunctional Network Matrix Switchers (MMXs), Digital Video Recorders (DVRs), network video transmitters, network video
receivers and network cameras remotely via network connection. Also, the network keyboard controls DVRs and PTZ cameras connected to the network
keyboard via RS-485 connection. The network keyboard can be accessed, configured and managed by using the INIT (Integrated Network Installation Tool)
program.
• Hybrid Remote Keyboard (IP & Analog Devices)
• Multi Device Control (PTZ/DVR/MMX/NMS/Server,etc.)
• Macro Function (up to 00 Macros)
• Programmable Presets, Tours, Patterns and others
• Separable Joystick for Left&Right-handed Operators
• Function Mapping (up to 8 Functions)
• Easy Firmware Upgrade by USB and Network
• Built-in Lines Character LCD Display
• Two-way Audio Communication
• x USB .0 Interface
• Integrated Web Server: 0Base-T/00Base-TX
• RS-485: x Half-Duplex Communication (PTZ & DVR)
Compatible Devices
• MMX (Multifunctional Network Matrix Switcher)
• DVR (Digital Video Recorder)
• Network Video Transmitter
• Network Video Receiver
• Network Camera
• PTZ Camera
Package Contents
• Network System Controller
• Joystick (Removable) and Joystick connecting cable
• Adaptor and accessory pack
• Power Cord
• INIT CD
• User's Manual
3
Advertisement
Table of Contents
