Eneo KBD-NSC-100 Installation And Operating Manual page 23

. Press the main monitor ID.
. Press the
3. Press the pane number.
4. Press the
5. Press the DVR ID.
6. Press the
device control buttons.
7. Press the camera number of the DVR.
8. Press the
control buttons if the camera is a PTZ camera.
Example II
You can control a DVR in a specific pane of the main monitor with pressing a pane ID without pressing the monitor ID. For this control, a unique pane ID should
be set up to each pain of a main monitor connected to the MMX (Run the INIT program –> Connect to the Remote Setup menu of the network keyboard –>
Set up the main monitor).
Cameras  ~ 6
Main Out
DVR
Video In
Master MMX
. Press the pane ID.
. Press the
3. Press the DVR ID.
4. Press the
device control buttons.
5. Press the camera number of the DVR.
6. Press the
control buttons if the camera is a PTZ camera.
button. You can control the MMX that the monitor is connected by using the device control buttons.
button.
button. The DVR's main monitor screen is displayed in the selected pane, and you can control the DVR by using
button. Video from the camera is displayed in the selected pane, and you can control the camera by using PTZ
Main Out
button. You can control the MMX that the monitor is connected by using the device control buttons.
button. The DVR's main monitor screen is displayed in the selected pane, and you can control the DVR by using
button. Video from the camera is displayed in the selected pane, and you can control the camera by using PTZ
3