Table of Contents
Advertisement
2. Installation
A device should be registered on the network keyboard properly for control by a network keyboard. The Basic mode and Advanced mode are supported for
registration and control of the device, and the device is controllable only in the mode which the device is registered on. When controlling devices via RS-485
connection only, you can register the devices in the Basic mode or in the Advanced mode. When controlling devices via network and RS-485 connections, you
can register the devices in the Advanced mode only. Both the LCD menu and the INIT program are available for the registration in the Basic mode, and only
the INIT program is available for the registration in the Advanced mode.
2.1 PTZ Camera Registration
You can register PTZ cameras to control via RS-485 connection. The control of PTZ cameras with different port information is supported only in the Advanced
mode.
Basic Mode
PTZ cameras can be registered on the network keyboard in the Basic mode locally by using the LCD menus or remotely by using the INIT program. Refer to
Chapter 5 – Remote Configuration, 5.3 Device for details on the remote registration. The following is about the registration by using the LCD menus.
.
Connect a PTZ camera to RS485 PTZ port of the network keyboard referring to the PTZ camera's User's Manual.
.
Enter the LCD menu by pressing the
details on entering and configuring the LCD menu.
Go to the Device –> General menu.
3.
•
Setup Type: Select Basic (Basic mode).
•
Port: Select PTZ and set up port information for RS-485 communication referring to the settings on the PTZ camera.
4.
Return to the Setup menu by pressing the
Number of CAMs: Enter the number of cameras connected to the network keyboard.
•
485ID, Model: Set up the RS-485 ID and model number of the PTZ camera for RS-485 communication. The RS-485 ID will be used to distinguish
•
the camera from other cameras when controlling it by using a network keyboard, so each camera should have its own unique RS-485 ID.
Refer to Appendix 3 – PTZ Camera Model Number for details on the model number of each PTZ camera.
Advanced Mode
PTZ cameras can be registered on the network keyboard remotely by using the INIT program.
Refer to Chapter 5 – Remote Configuration, 5.3 Device for details on the remote registration.
and
button together of the network keyboard. Refer to Chapter 4 – LCD Menu Configuration for
button.
0
Advertisement
Table of Contents
