Table of Contents
Advertisement
6.3. Click a monitor in the list, and then the Edit button. Set up the monitor ID.
The network keyboard assigns the ID automatically when the MMX is registered,
and you can change the ID. The ID will be used to distinguish the monitor from other
monitors when controlling it by using a network keyboard, so each monitor should
have its own unique ID.
6.4. Click a camera in the list, and then the Edit button.
• When the camera is connected to the Video In port of the MMX through the Main
Out of the DVR:
− ID: The network keyboard assigns the ID automatically when the MMX is
registered, and you can change the ID. The ID will be used to distinguish the
camera from other cameras when controlling it by using a network keyboard,
so each camera should have its own unique ID.
− Type: Select Device Output and select a DVR which the camera is connected
to from the Output Device drop-down list.
• When the camera is connected to the Video In port of the MMX through the
Loop Out of the DVR:
− ID: Set up the camera ID as same as the camera ID of the DVR connected to
the MMX. Otherwise, you cannot control the camera. When clicking the OK
button displays a message box to confirm the use of the existing ID.
Click the OK button to complete the changes.
− Type: The camera settings set while registering the DVR connected to the
MMX are applied to the camera identically after the ID setting is complete.
5
Advertisement
Table of Contents
