Table of Contents
Advertisement
APPENDIX 2
Buttons
NOTE: In the operation explanation for each button, „ –> " indicates that the buttons are pressed sequentially, and „&" indicates the buttons are
pressed together.
Operation Command
NOTE: Devices should be registered on the network keyboard and set up properly to perform the commands.
Button
Designation
Number ( to 9)
Number (0)
Shift
ESC
Monitor
Pane
Device
Camera
Macro
– / +
Function ( to 8)
Operation
• Device number or ID –>
device or camera to control, or macro to perform.
•
–>
–>
: Starts panic recording of all camera channels of all devices registered on the network
keyboard.
•
–>
–>
&
the network keyboard.
•
–>
–>
&
on the network keyboard.
•
–> Button : Performs the secondary function of the button if the button supports two functions.
•
&
: Locks buttons of the network keyboard.
•
&
: Enters the LCD menu.
•
: Cancels the command during the command operation or returns to the previous menu during the menu
configuration.
• Monitor ID –>
: Allows you to select the monitor.
• Pane No. or ID –>
: Allows you to select the selected pane.
• Device No. or ID –>
: Allows you to control the selected device.
• Camera No. or ID –>
: Allows you to control the selected camera.
• Macro ID –>
: Performs the selected macro.
• Selects the previous or next monitor, pane, device or camera during the command operation.
• Navigates through setup menus or adjust number's value during menu configuration.
• Performs the preset function.
,
,
,
or
: Stops panic recording of all camera channels of all devices registered on
: Deactivates alarm out of all alarm-out channels of all devices registered
35
: Selects a monitor, pane, device,
Advertisement
Table of Contents
