Table of Contents
Advertisement
Button
Designation
Operation
•
Pressing the button again disables the function.
•
Enable
Pressing the button again disables the function.
Speaker / Mic
• Receiving and sending audio is available only when controlling a device that supports two-way audio communication
via network connection. Also, the audio channels for two-way audio communication should be set up when
registering the device. This might not work properly if the network keyboard performs other functions during two-way
audio communication.
Menu
• Displays the device's menu and allows you to change its settings.
Enter Button
• Selects an item or completes an entry that you have made when in the setup mode.
(
)
• Toggles the zoom size when in the zoom mode while controlling a DVR.
• Navigates through setup menus or adjust number's value when in the setup mode.
•
Arrow Buttons
•
when in the setup mode while controlling a DVR.
• Functions only when controlling a DVR.
• Changes the zoom size when in the zoom mode. Turning the Jog Dial clockwise or counterclockwise increases or
decreases the zoom size.
• Changes the PIP screen size when in the PIP mode. Turning the Jog Dial clockwise when the PIP screen is in the left
Jog Dial
and counter clockwise when the PIP screen is in the right makes the PIP screen larger.
• Increases or decreases the number values when in the setup mode.
• Plays video forward or backward image-by-image by turning the jog dial clockwise or counterclockwise when
playback video has been paused.
• Functions only when controlling a DVR.
• Plays video when in the playback mode. The shuttle ring is spring loaded and returns to the center position when
Shuttle Ring
released. Turning the ring clockwise or counterclockwise plays video forward or backward. The playback speed varies
with the amount the ring is turned: fast forward and rewind.
: Receives audio from the remote site through the speaker when controlling a camera.
&
: Sends audio to the remote site through the microphone when controlling a camera.
: Changes the layout group while controlling a DVR.
: Changes the location of the PIP when in the PIP display mode, and increases or decreases the number values
38
Advertisement
Table of Contents
