Network - Eneo KBD-NSC-100 Installation And Operating Manual

Network system controller with 3-axis joystick and jog shuttle
Table of Contents

Advertisement

5.2 Network

You can change the network settings and set up DVRNS information.
IP Address
DVRNS
Enter the information of the DVRNS server that the device to control is registered if the device uses the DVRNS function.
• Type: Select the type of network configuration. Ask your network provider for details about
the network connection type and connection information for the network keyboard.
– Manual: Select when the network keyboard is using a static IP address for network
connection, and set up LAN parameters manually.
– DHCP: Select when the network keyboard is networked via DHCP (Dynamic Host
Configuration Protocol). Click the OK button, and a temporary IP address is automatically
assigned to the network keyboard. The network keyboard periodically will be issued a
new IP address automatically.
• DNS Server: Enter the IP address of the DNS server. If you set up the DNS server, the
domain name of the server can be used instead of the IP address when the DVRNS server
is set up. Ask your Internet service provider for the IP Address of the DNS Server.
• DVRNS Server: Enter the IP address or domain name of the DVRNS server acquired from
the device's network administrator. You can use the domain name instead of IP address if
you set up the DNS server during the IP Address setup.
• Port: Set up the port number of the DVRNS server.
8

Advertisement

Table of Contents
loading

Related Products for Eneo KBD-NSC-100

Table of Contents