Eneo KBD-NSC-100 Installation And Operating Manual page 22

Controlling DVR on Specific Monitor
Cameras  ~ 6
Main Out
DVR
Video In
Spot Out
Master MMX
Video In
Spot MMX
. Press the monitor ID.
. Press the
is a main monitor.
3. Press the DVR ID.
4. Press the
using device control buttons.
5. Press the camera number of the DVR.
6. Press the
control buttons if the camera is a PTZ camera.
Controlling DVR on Specific Pane
Example I
You can control a DVR in a specific pane of the main monitor.
Cameras  ~ 6
Main Out
DVR
Video In
Master MMX
Main Out
Spot Out
button. You can control the MMX that the monitor is connected by using the device control buttons if the monitor
button. The DVR's main monitor screen is displayed in the selected monitor, and you can control the DVR by
button. Video from the camera is displayed in the selected monitor, and you can control the camera by using PTZ
Main Out