Novell NetWare
N
O
V
E
L
L
N
E
T
W
A
R
E
4.5.2
Configuring Novell NetWare 4.x for AppleTalk
4-10
2. On the server, back up the sys:\system\atps.cfg Þle.
Note: Make sure you include the beginning and end quotes in the
following commands.
Edit the atps.cfg Þle, and add a line with the Kodak printer AppleTalk
name and its associated AppleTalk zone to the list of printers in the
following format:
<Appletalk printer name>:<Appletalk zone>
For example, enter the following command:
ÒKodak Printer:Kprinter_ZoneÓ
Note: Make sure you include the quotation marks in the command.
If no queue is stated, a NetWare queue associated with the AppleTalk
printer name, NW_Kodak_Printer, is created. You can verify this using
PCONSOLE.
To create a different queue name, enter the following command:
<Appletalk name>:<Appletalk zone> -o <queuename>
For example, enter:
ÒKodak Printer:KPrinter_ZoneÓ -o KPrinter_q
3. Save the atps.cfg Þle.
4. Load atps -s -v
Use the -v [verbose] option to view the atps activity and to verify that
the contents are executed properly.
Your server can now use the same print services that Macintosh
computers use to access a Kodak printer.
Use the NetWare 4.x utilities provided to set up AppleTalk. This setup is
menu driven, so you do no need to edit any Þles.
July 1998