Tcp/Ip Configuration - Kodak 3H0610 Manual

Windows - FastManage Configuration Utilities
3.6.1

TCP/IP Configuration

F
A
S
T
M
A
N
A
G
E
3-22
You make a series of choices to conÞgure the NIC on TCP/IP networks.
Below is a hierarchy of these choices.
From TCP/IP ConÞde., selections include:
IP ConÞguration -->
¥ IP Address: Allows you to change the IP address of the device.
Changes take effect at system reset. Exit and relaunch the utility.
¥ Subnet Mask: Sets the subnet mask address for the device.
¥ Gateway Address: Sets up the address of the router that routes IP
packets across subnets.
¥ Enable RARP: When enabled, the device will try to obtain its IP
address using RARP at power-up.
¥ Enable BOOTP: When enabled, the device tries to obtain its IP
address using BOOTP at power-up.
¥ IP Traps -->
¥ Enable IP Traps: When enabled, sends ÒtrapsÓ (problems) to a
designated system.
¥ IP Traps Hosts: Designates where the traps will be sent.
¥ Enable DHCP: Enables/disables the DHCP feature.
LPD ConÞguration: Enables BSD-type LPD print services and its
options.
July 1998