Fastmanage Hardware Requirements; Software Requirements - Kodak 3H0610 Manual

10/100 network interface card
Table of Contents

Advertisement

Windows - FastManage Configuration Utilities
3.1.1

FastManage Hardware Requirements

F
A
S
T
M
A
N
A
3.1.2

Software Requirements

G
E
3-2
FastManage requires:
¥
A 486 Pentium PC, 66 Mhz computer or higher
¥
16 MB of RAM or higher
¥
At least 4 MB of free disk space
¥
Microsoft Windows 3.1 or higher
¥
Ethernet card installed
FastManage runs as a stand-alone tool (that is, users need not have any
TCP/IP packages on their systems). However, if a system has any
Winsock compatible TCP/IP stacks (that is, PC/TCP, Chameleon, or LAN
Workplace), FastManage will co-exist with these packages. FastManage
runs on top of public domain packet drivers as well as ODI drivers.
IP ConÞguration
¥
Packet or ODI Driver must be loaded for the PC network interface.
¥
For ODI Drivers, add the following line to the net.cfg Þle:
Frame Ethernet_II
IPX ConÞgurations
¥
Novell 4.1 Drivers for Windows and DOS. Refer to the Novell Netware
Documentation for information.
¥
ODI Driver must be loaded for the PCÕs network interface.
NetBIOS ConÞguration
¥
NetBIOS over NetBEUI network conÞguration for Windows 3.11 or
Windows 95.
July 1998

Advertisement

Table of Contents
loading

Table of Contents