Changing Between Postscript And Raster Printing Modes - Kodak 8Xxx Series Printers - Kodak 3H0610 Manual

Printing
P
11.2 Changing between PostScript and Raster Printing
R
Modes - Kodak 8xxx series Printers
I
N
T
I
N
G
11-2
If a Kodak driver is not available, you can use a generic PostScript driver
or LaserWriter driver with the Kodak printer PPD Þle to generate
PostScript output.
1. Press Setup/Select on the display panel when READY appears in the
panel.
Power
Error
Print Cancel
scroll Setup/Select
" "
2. Press until SETUP:MODE appears.
3. Press Setup/Select to access the SETUP:MODE submenu.
4. Press until MODE:POSTSCRIPTÓor MODE:raster appears.
" "
The currently selected version is indicated by an asterisk (*).
5. Press Setup/Select to make your choice.
6. Press until MODE:EXIT appears.
" "
7. Press Setup/Select.
8. Press until SETUP:EXIT appears.
" "
9. Press Setup/Select.
If you change the mode, wait for the printer to reinitialize and return to
READY.
July 1998