Discovery Application Messages; Ping Application Message - Kodak 3H0610 Manual

3.11.3 Discovery Application Messages

The following table lists errors messages that you may see while using
the Discovery Application.
IP, IPX, and NetBIOS Discovery are
disabled. For Discovery to work, at least
one of them should be enabled. Please
update SNMP section, IP/IPX entries of
issnmp.ini Þle. Discovery will exit now
Unable to open Þle (bitmap Þle) or
Unable to copy palette for the bitmap or
Unable to create bitmap from Þle DIB
No such pathway or drive is not ready
For reliable Discovery operation using IPX, it is recommended that the
following systems all be on the same subnet :
¥ Novell server servicing the printer
¥ Novell server you log into as a user from the workstation running
Discovery. (It is also recommended that this server be the same as
the server servicing the printer).
¥ Workstation running Discovery
¥ Kodak printer

3.11.4 Ping Application Message

The following message may appear while you are using the Ping
Application:
IP is disabled in the Þle issnmp.ini. IP
needs to be enabled for this application
to run. This application will exit now
July 1998
Windows - FastManage Configuration Utilities
Discovery Application Messages
Message
Ping Application Message
Message
Solution
Valid Values are: IP=YES or IP=NO,
IPX=YES or IPX=NO, and
NetBIOS=Yes or NetBIOS=No
The FastManage installation may be
bad. Reinstall.
Restart Windows.
Solution
Enable IP discovery in the Discovery
Application to enabled IP.
F
A
S
T
M
A
N
A
G
E
3-35