Bootp Server Application Messages - Kodak 3H0610 Manual

Windows - FastManage Configuration Utilities

3.11.5 BOOTP Server Application Messages

F
A
S
T
M
A
N
A
G
E
3-36
The following messages may appear while you are using the BOOTP
Server Application.
BOOTP Server Application Messages
Problem
Please retry when there is a
bootptab Þle
IP is disabled in the Þle
issnmp.ini. For this
application to run, enabled IP
Error to read packet
The address should contain
only HEX digits. i.e., 0-9, and
A-F/(a-f)
Hardware address is not
speciÞed. So this entry cannot
be saved
IP address is not speciÞed. So
this entry cannot be save
This is not a valid hardware
address
Cause
No Bottleful found Enter bootptab Þle and
retry.
IP discovery disabled Enable IP Discovery in
in the Discovery the Discovery
Application Application to enabled
IP.
A bad BOOTP packet Retry. If the problem
is received persists, reset the
device.
Validation for Enter a valid Macintosh
Macintosh address address.
Appears during the Enter the Host name
operation ÒAdd entry address in the user entry
to Bootptab ÞleÓ form.
Appears during the Enter the IP address in
operation ÒAdd entry the user entry form.
to Bootptab ÞleÓ
User input invalid A valid hardware
Macintosh address address is a 12-digit
HEX number. For
example:
01.23.45.67.89.AB
Solution
July 1998