Troubleshooting Fastmanage; Error Messages - Kodak 3H0610 Manual

3.11 Troubleshooting FastManage

The following table lists problems that may occur with FastManage; it also
lists possible solutions.
SNMP community strings are
defaulted to public and private
Unable to start the FastManage
application. A message such as
ÒUnable to start protocol stackÓ
displays
Applications start, but do not display
connected ports or SNMP statistics
Can not start applications and the
message ÒIP_STACK section
issnmp.ini Þle needs IPADDR= setÓ
appears
The message ÒUnable to Þnd and
start net driverÓ appears
The message ÒNo Netware
connections foundÓ when running
Discovery or ÒHost not in IPX binderyÓ
appears

3.11.1 Error Messages

The following table contains error messages that you may see while using
the FastManage Network Manager.
July 1998
Windows - FastManage Configuration Utilities
Problem
Change the community strings in the
issnmp.ini Þle
Restart Windows.
Restart Windows. Verify Þrmware agent
is compatible with FastManage
Reinstall FastManage with IP and IPX
protocols.
Load IPX drivers before starting
Windows.
Load VLM.EXE before starting
Windows.
Solution
3-33
F
A
S
T
M
A
N
A
G
E