Novell Netware; Netware Client Installation Overview; Configuring In A Bindery Environment; Configuring Using Pconsole - Kodak 3H0610 Manual

4 Novell NetWare

Refer to Kodak Printer/NIC Installation and ConÞguration Overview in
Chapter 1 for overall conÞguration process steps and details. This chapter
describes the conÞguration of Novell Netware print servers and queues.

4.1 NetWare Client Installation Overview

In general, to install on a NetWare workstation, determine whether the
Kodak printer/NIC will be installed in:
¥
¥
¥
Note: For complete information on using NetWareÕs client utilities, refer to
the NetWare documentation.
4.2 ConÞguring in a Bindery Environment
The Kodak printer/NIC can be conÞgured to service up to 16 print queues
on 16 different bindery style NetWare servers (NetWare 2.x, 3.x, 4.x). If
you are not using NetWare Directory Services (NDS), disable it.
4.2.1

Configuring using PCONSOLE

Refer to the NetWare documentation for information on using the
PCONSOLE command.
To conÞgure the KODAK NIC using the PCONSOLE command:
1. Create a print server called KDxxxxxx through PCONSOLE.
where xxxxxx are the last six digits of the unitÕs Ethernet address.
2. Create a queue for the printer using PCONSOLE.
3. Assign the queue created above to the print server KDxxxxxx.
4. Power cycle the printer.
The queue will send data to the printer.
July 1998
NetWare 2.x, 3.x, 4.x bindery emulation environment
NetWare 4.x NDS environment
Netware AppleTalk (ATPS) environment.
Novell NetWare
4-1
N
O
V
E
L
L
N
E
T
W
A
R
E