Table of Contents
Advertisement
Ethernet address:00 40 C8 00 0B 0B
IP address:0.0.0.0
Console status monitoring: Off
Network monitor password security: Off
TCP sockets enabled.
LPD enabled.
Netware enabled.
Microsoft Windows print services enabled.
AppleTalk enabled.
(type ÒNÓ in monitor to view the network protocol parameters)
A.4.3
FÑFlash firmware load enable/disable
Flash load is enabled.
This Bank: Vers. 6.1.5, Datecode 3/13/1997 16:15, (in Bank #1,
seqNum=10)
Other Bank: Vers. 6.0.29, Datecode 2/25/1997 12:20, (in Bank #0,
seqNum=9)
Flash load currently is enabled. Disable, yes or no (y or n)?:
Special Options for Flash Code Image Control:
1
2
3
<enter>
A.4.4
IÑDisplay/set IP address
current IP address: 0.0.0.0
Enter new IP address: 199.86.12.165 (<cr> for no change)
new IP address: 199.86.12.165
July 1998
(Restart Running Image in Other Bank)
(Copy This Image into Other Bank)
(Display ßash chip information)
(don't change/continue)
NIC Telnet
A
P
P
E
N
D
I
X
A
A-3
Advertisement
Table of Contents
Troubleshooting
