Changing From Postscript To Raster Printing Modes - Kodak Dcp9000 Proofers - Kodak 3H0610 Manual

11.3 Changing From PostScript to Raster Printing Modes - Kodak
DCP 9000/9300 Proofers
1. If the Indicator next to the ON LINE key is lit, then Press ON LINE on
the display panel when READY appears in the panel to take the
proofer OFF LINE.
2. Press MENU and SETUP:EXIT will appear.
3. Press
4. Press ENTER to access the SETUP:MODE submenu.
5. Press
The currently selected version is indicated by an asterisk (*).
6. Press ENTER to make your choice.
7. Press
8. Press ENTER.
9. Press
10.Press ENTER.
If you change the mode, wait for the printer to reinitialize and return to
READY.
July 1998
MENU
ON LINE
TEST
CANCEL/
ENTER
RESET
until SETUP:MODE appears.
" "
until MODE:POSTSCRIPT or MODE:RASTER appears.
" "
" "
until MODE:EXIT appears.
" "
until SETUP:EXIT appears.
Printing
P
R
I
N
T
I
N
G
11-3