3.
Perform the setting.
Auto Pan No.
Auto Patrol operates in the sequence of this number.
4.
Close the window.
After the setting is completed, click "
1
Set Mode. Mode can be set from 1 to 3. Click
the tab for setting Mode.
2
Set Position number.
Set the position number that moves in the se-
quence of the patrol number.
3
Set Interval.
Set the time for displaying each position set
2
in
.
4
Register the setting.
Click "
pleted. The setting value of the mode being
displayed and the operation mode being se-
lected at that moment will be registered.
" to close the window.
Note
• For starting and stopping the operation of
Auto Pan, Auto Patrol and Auto Trace, re-
fer to page 47.
" when the setting is com-
67