Table of Contents
Advertisement
2-4 Other Settings with V.Networks Setup Tool [2. Alarm Setting] (continued)
Other trigger
Item
3
Retry (1 to 3)
4
List
5
Preset Position
• Mode
• Alarm Output
• Black & White
• Message Packet
6
Black & White
• Mode
• Alarm Output
• Go to a preset
position
• Return Mode
• Interval
• Message Packet
36
Function & Setting
This function sets how many times an alarm alert to
[V.Networks Controller] is repeated (1 to 3).
Memo
Depending on the LAN environment, alarm alert might
fail.
If it fails, set the value to "3".
In such a case, alarm by [V.Networks Controller] itself
is set off only once.
Press here to show the IP addresses of the PCs to which
alarm input is reported. To delete an IP address, select the
address and press [Delete].
Memo
The list only allows storage of up to 10 addresses.
For configuration of the preset position during alarm input.
*For details on the setting values, please refer to the
[Alarm1/Alarm2] item.
For configuration of settings during alarm configuration in
the B&W mode.
*For details on the setting values, please refer to the
[Alarm1/Alarm2] item.
Initial Value
—
—
—
*For the initial
value, please
refer to the
[Alarm1/
Alarm2] item.
—
*For the initial
value, please
refer to the
[Alarm1/
Alarm2] item.
Advertisement
Table of Contents
