Table of Contents
Advertisement
Item
1
Alarm1/Alarm2
Black & White
Message Packet
2
Reray Alarm
• Alarm Output
• Go to a preset
position
• Return Mode
• Interval
• Black & White
• Message Packet
Function & Setting
(continued)
For switching from color to B&W mode when there is alarm
input.
Not Available : Disabled.
Color
: Color mode at all times.
Return
: B&W mode at all times.
Event
: Switch automatically between the color
and B&W modes according to the bright-
ness of the object.
Memo
• When Auto is selected, there may be cases when
switching cannot be correctly performed due to the
lighting conditions or angle of view.
To ensure that switching is properly performed, it is
recommended that signals from the external sensor
(sold separately) be input to the alarm terminal of
this unit.
For setting whether to send alarm packets to the PC when
there is alarm input.
Not Available : Do not send alarm packets.
Available
: Send alarm packets.
Select here to enable the alarm function, which is activated
when two alarms are successively received within a cer-
tain period of time. The sequence and interval of alarm in-
put can be set.
If [Alarm Output] is selected, alarm signals are sent to the
[ALARM OUTPUT] terminal according to the output port
setting.
Memo
• A second alarm input enables this relay alarm func-
tion, and alarm will not be activated for this second
input.
• Unless the alarm output is enabled, this function is
not activated even if [Alarm Output] of the [Alarm Set-
tings] screen is selected.
* For details on the setting values, please refer to the
[Alarm1/Alarm2] item.
Initial Value
—
Not Available
Not Available
—
*For details on
the setting
values, please
refer to the
[Alarm1/
Alarm2] item.
35
Advertisement
Table of Contents
