Serial Number; Service Tag (Only On Some Printers); Engine Setting 1 Through 4; Model Name - Lexmark E460dn Service Manual

4513-630, -63W, -6EW

Serial Number

The serial number can only be viewed and cannot be changed.
To view the serial number:
1.
Select Serial number from PRINTER SETUP.
2.
Press Return to return to PRINTER SETUP.

Service Tag (only on some printers)

The service tag number can only be viewed and cannot be changed.
1.
Select Service Tag from the PRINTER SETUP menu.
2.
Press Back to return to PRINTER SETUP.

Engine Setting 1 through 4

Warning: Do not change these settings unless requested to do so by your next level of support.

Model Name

The serial number can only be viewed and cannot be changed.

Configuration ID

The configuration ID is used to communicate characteristics of certain areas of the printer that cannot be
determined by hardware sensors. The configuration ID was originally set when the printer was manufactured
and is located on the printer label.

Edge to Edge

When Edge to Edge is set to On, text and graphics are printed with all margins set to the physical edges of the
page. This feature does not work in PPDS emulation.

Par S Strobe Adj (parallel strobe adjustment)

This setting adjusts the factory setting for the amount of time the strobe is sampled to determine that valid data
is available on the parallel port. Incrementing this value by one means the strobe is sampled 50 nanoseconds
longer. The range of values are between -4 and +6, in increments of one. A value of zero indicates no change is
made from the factory setting.
3-14
Service Manual