Duplex Tests; Quick Test; Top Margin; Left Margin - Lexmark E460dn Service Manual

4513-630, -63W, -6EW

Duplex Tests

The following tests are used to determine if the duplex is working correctly:
•
•
•
•
•

Quick Test

The Quick Test contains the following information on a duplexed page:
•
•
•
•
To print the duplexed Quick Test page:
1.
Select Quick Test from the DUPLEX TESTS menu.
2.
Select Single or Continuous by pressing
3.
Press

Top Margin

1.
Select Top Margin from the DUPLEX TESTS menu.
2.
To change the margin value, press
3.
Press

Left Margin

1.
Select Left Margin from the DUPLEX TESTS menu.
2.
To change the margin value, press
3.
Press

Sensor Test

This test is used to determine if the input sensor is operating correctly.
•
•
3-10

Service Manual

Quick Test
Top Margin
Left Margin
Sensor Test
Duplex Feed 1
Print registration settings
Alignment diamonds at the top and bottom
Horizontal lines to check for skew
General printer information, including current page count, installed memory, serial number,
and code level.
to print the page.
to save the desired margin value.
to save the desired margin value.
If the sensor is operating correctly, then OP (Open) will appear on the display:
Press to return to the DUPLEX TESTS menu.
or .
to increase the value or
to decrease the value or
Sensor Test
Input=OP
to decrease the value.
to increase the value.