Water Filter; Scalehammer - VKI Technologies Eccellenza Pod Operation Manual

Hide thumbs Also See for Eccellenza Pod:

Table of Contents

Eccellenza Pod

Water Filter

We recommend the use of a high quality water filter (such as Everpure™ Filters) which will eliminate

most odors present in water, and reduce the amount of particles entering the water tank. The following

are basic instructions for installing a cartridge type filter using a head bracket (Everpure™ type filter).

Assemble the retaining bracket to the filter head.

Insert the cartridge into the filter head and turn the cartridge clockwise.

Apply Teflon tape to the threaded portion of two 3/8" x 1/4" fittings and screw each into the

filter head.

Mount the water filter at an easily accessible place for servicing, such as:

(a) Under the sink against the back or side wall,

(b) On the back of a utility cabinet,

NOTE: When the filter is installed or replaced, make sure to write the

installation date in the provided area on the filter cartridge. Follow the

manufacturer's recommendations for filter replacement intervals.

VKI also recommends the use of the Scalehammer electronic scale treatment device. The

Scalehammer™ electronically treats incoming water, preventing scale particles from sticking to the

water tank, valves, tubing, etc. As scale is one of the largest causes of service calls on these types of

equipment, using the Scalehammer™ keeps the equipment working efficiently and free of scale

Table of Contents