Fax Page - Oce OP1018 Operation Manual

Using COMMAND CENTER

FAX Page

Item
Local FAX Name
Local FAX Number
Local FAX ID
FAX Line
FAX Media Type
Speaker Volume
Monitor Volume
Item
TTI
TTI Position
8-14
This section includes settings, such as FAX transmission and reception settings, that
apply to the FAX function of the device.
FAX > Defaults
The table below provides a summary of the items displayed on the FAX Default
Settings page.
Description
Specifies your FAX system name.
Specifies your FAX system number.
Specifies your FAX system ID.
Sets the type of phone line to correspond to the type of telephone service that
you are using. Be sure that the type of phone line you select is correct because, if
the setting is incorrect, dialing will be impossible. The choices are Tone (DPMF)
or Pulse (10pps).
Sets the media type for printing the received documents. Refer to Paper
Specifications.
Sets the volume of the internal speaker that allows you to listen to conditions on
the telephone line when the On-Hook key was pressed. The choices are Off and
levels 1, 2 or 3.
Sets the volume of the internal speaker that allows you to listen to conditions on
the telephone line when the On-Hook key was not pressed. The choices are Off
and levels 1, 2 or 3.
FAX > Transmit
The table below provides a summary of the items displayed on the FAX transmission
page.
Description
Selects On or Off whether to send the TTI (Transmit Terminal Identifier)
information to other party.
Selects the TTI position to be printed on the transmitted documents.
ADVANCED OPERATION GUIDE