External Tuning Setting - Motech DS3640 User Manual

After finishing setting procedure, if a Slave receives only the output order sent
by Master but not receives the synchronous signal, then it will present the
following error messages. The error message " SYNC ON" is shown when the
slave is not receiving the synchronous output ON signal. The error message
" SYNC OFF" is shown when the slave is not receiving the synchronous output
OFF signal.
5.9

External Tuning Setting

DS3640/DS6024/DS8018/DS10014 provides the capability to control the
output voltages by an external voltage/resistance. The range of the external
voltage is in 0 ~ 10 Vdc or 0 ~ 5 Vdc and the range of the external variable
resistance is between 0 ~ 5 Kohm to control the output voltage (0 ~ 36V for
DS3640 and 0 ~ 60V for DS6024 and 0 ~ 80V for DS8018 and 0 ~ 100V for
DS10014) and the output current (0 ~ 40A for DS3640 and 0 ~ 24A for
DS6024 and 0 ~ 18A for DS8018 and 0 ~ 14.4A for DS10014). The wirings of
the external control is shown in the following figure.
:
LL L
:
L L L
42
:
:
F F