Motech DS3640 User Manual page 23

(11) Output
Control the On/Off of the output power.
(12) The knob controller:
Use this tuner to adjust voltage or current (press
cursor display first). It is an option item in Menu Setting.
(13) Enter
This key is the confirming key of current or voltage setting value; or
press
mode) or current (at CC mode).
(14) Mem
Press this key to enter the memory device status page. Users can then use
the numerical key or knob to select the target memory set to save or
recall the configuration by pressing the STORE or RECALL key. Ten
sets are available in selection.
(15) Menu
Use this key to make system parameters setting. There are eight (8)
major items under operation. Users may press
numerical keys to enter the corresponded setting page.
Press
pages:
:
:
under output status to dynamically adjust voltage (at CV
:
=
.
:
or key to jump to one of the following three
. 1
2 .
3 . T
.
14
first to let
F F
, and the
,