PROG:STEP:VOLT 10
PROG:STEP:ONT 0.5
PROG:STEP 5
PROG:STEP:CURR 1
PROG:STEP:VOLT 20
PROG:STEP:ONT 0.5
PROG:STEP 6
PROG:STEP:CURR 2
PROG:STEP:VOLT 5
PROG:STEP:ONT 0.5
PROG:STEP 7
PROG:STEP:CURR 2
PROG:STEP:VOLT 20
PROG:STEP:ONT 0.5
PROG:STEP 8
PROG:STEP:CURR 2
PROG:STEP:VOLT 0
PROG:STEP:ONT 0.5
PROG:NEXT 0
PROG:SAV
PROG 2
PROG:RUN ON
Choose step 5
Choose step 6
Choose step 7
Choose step 8
Select next program to run after
program 2 is complete, 0 means stop
After edit, use Save command to store
program 2 in the hardware
To run the program stored in the
hardware, it shall select program
number and then use RUN ON
command to execute the program.
49