Motech DS3640 User Manual page 26

LCD BACKLIT:
RECALL DEFAULT:
Ext 5V OUTPUT:
POWER ON STATE:
HOT KEY:
*If entering the HOT KEY mode, screen will present RMT symbol as
shown in the following picture.
Set the backlight of the LCD to always
ON or OFF after 1/5/10/30 minutes
Restore the manufactuer default setting
5
,
= .
Turn the extra 5V power (on the rear panel)
ON/OFF
Users may be able to set the output state after
the power is on. When OFF is selected,
DS3640/DS6024/DS8018/DS10014 will do
nothing after power on. If LAST is selected,
then after power on, DS3640/DS6024/
DS8018/DS10014 will be set to the last
output state when power off. If USER (user
defined) is selected, it will jump to next line
to make setting of output voltage, current,
and output state. Then after power on,
DS3640/DS6024/DS8018/DS10014 will set
up the output to ON/OFF and the output
voltage and current according the settings
here.
Set the HOT KEY functioin ON/OFF, if the
HOT KEY function is ON, User can using
0 – 9 number keys to recall the voltage and
current setting value in the memory that have
been saved.
17
= FF
= F F
,
= .
= FF
= F F