Motech DS3640 User Manual page 59

Example 3:
If it needs to execute Program 2 right after Program 1 is executed then
program 1 shall be modified to have NEXT 2 command. The following steps
can be taken for the modification and execute the programs.
PROG 1
PROG:NEXT 2
PROG:SAV
PROG 1
PROG:RUN ON
Select program 1
Change the NEXT command from
NEXT 0 to NEXT 2
After edit is complete use Save
command to store changes in the
hardware
To run the program by selecting the
program number first and then using
RUN ON command to execute it.
50