Advanced Settings - Yealink VP-2009 Getting Started Manual

IP Video Phone

Advanced Settings

Select Account->Advanced page to set the advanced information via web interface:
The following table lists the instruction of the field about the advanced Account Setting.
Field Name
UDP Keep-alive
Message
UDP Keep-alive
Interval
Login Expire
Local SIP Port
RPort
SIP Session Timer
DTMF Type
You can only configure these settings via web interface.
1) Choose Account.
Description
Defines whether to active the phone UDP Keep-alive mechanism.
The default is Enabled.
This parameter specifies how often the phone will send a packet to
the SIP server. Default is 30 seconds.
This parameter specifies the time frequency that phone refreshes
its registration. The default interval is 3600 seconds.
Local SIP port. The default value is 5060.
The parameter allows you configuring the proxy to send responses
back to a particular address and port. The default is disabled.
This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of SIP
sessions through a re-INVITE or UPDATE request. The refresh
allows both user agents and proxies to determine if the SIP
session is still active.
Select the DTMF type.
Using the Advanced Phone Functions
- 53 -