Yealink VP-2009 User Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. Telephone
  5. VP-2009
  6. User manual

Yealink VP-2009 User Manual

Videophone
Hide thumbs Also See for VP-2009:
Table of Contents

Advertisement

Quick Links

See also: Admin Manual , Configuration Manual
VP-2009(P) Elite is an H.264 based broadband videophone supporting Video and Voice applications.
Its major functions include IP Telephony, IP Camera Viewer (SIP based) and Photo frame. It can satisfy
the demanding requirements of the next generation of IP broadband communication applications and
open the door to the world of multimedia.
VP-2009(P) Elite is an innovative IP media phone equipped with the most advanced video compression
technology. It offers unrivalled super voice and picture quality, innovative functional richness, friendly
user interface, stylish and elegant design, enhancing the instant, face-to-face communication
experience even at low bandwidth.
Meanwhile it supports Voice Mail, Screen Saver, Advertisement, etc. Which make it not only a video
phone but also a media phone for entertainment. It is definitely ideal for multimedia communication,
virtual office and all IP video conversation for business or family users.
In this User Guide, you will find everything you need to quickly use your IP Video Phone. Be sure to
verify with your system administrator that your network is prepared for configuring your IP phone. As
well, be sure to read the Packing List section in this guide before you set up and use the phone.
Declaration of Conformity
Hereby, it's declared that this phone is in conformity with the essential requirements
and other relevant provisions of the CE, FCC.
CE Mark Warning
This is a class A device, in a domestic environment; this product may cause radio interference, in which
case the user may be required to take adequate measures.

About This Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VP-2009 and is the answer not in the manual?

Questions and answers

Giuseppe Attolini
April 22, 2025

Salve, avrei bisogno di sapere la procedura per riportare il telefono alle impostazioni di fabbrica poichè ho dimenticato la password e non riesco ha cambiare nessuna delle impostazioni.

0
1 comments:
Mr. Anderson
May 11, 2025

To reset the Yealink VP-2009 to factory settings if the password is forgotten, follow these steps:

1. Locate the physical reset button on the device (usually a small hole).
2. Use a pointed object (like a paperclip) to press and hold the reset button.
3. Hold the button for about 10 seconds until the phone restarts.
4. The device will reset to factory settings, including the default username and password (admin/admin).

This answer is automatically generated

0

Related Manuals for Yealink VP-2009

Summary of Contents for Yealink VP-2009

  • Page 1: About This Guide

    IP broadband communication applications and open the door to the world of multimedia. VP-2009(P) Elite is an innovative IP media phone equipped with the most advanced video compression technology. It offers unrivalled super voice and picture quality, innovative functional richness, friendly user interface, stylish and elegant design, enhancing the instant, face-to-face communication experience even at low bandwidth.

  • Page 2: Safety Precautions

    Safety Precautions General Requirements  Before you install and use the device, read these safety precautions carefully and observe them during operation.  During storage, transportation, and operation, keep the device dry.  During storage, transportation, and operation, avoid collision and crash for the device. ...
  • Page 3  During lightning whether, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.  If the device is not used for a long time, disconnect it from the power supply and unplug the power plug.

  • Page 4: Table Of Contents

    Main menu..............................- 10 - Picture Dial ............................... - 12 - DSS Key ..............................- 12 - 5 Configuring VP-2009(P) Elite ......................- 14 - Setting Interface ..............................- 14 - Set the Account ............................- 14 - Set the Network ............................- 15 - Set the Display............................
  • Page 5 Upgrade Tab Page ............................ - 64 - Security Tab Page ............................. - 66 - Saving Settings ............................- 68 - 7 Using VP-2009(P) Elite ........................- 69 - Overview ................................- 69 - Call Type ..............................- 69 - Answer Mode ............................- 69 - Multiple Accounts ............................
  • Page 6 BLF Function ..............................- 72 - BLF List ................................- 73 - Check the call statistics ............................- 73 - 8 Maintaining VP-2009(P) Elite ......................- 74 - Restarting VP-2009(P) Elite ..........................- 74 - Resetting VP-2009(P) Elite ..........................- 74 - Firmware upgrade ..............................

  • Page 7: Getting Started

    IP Video Phone Getting Started Getting Started Packing List The following components are included in your package:  IP Video Phone VP-2009(P) Elite  Power Adapter  Handset & Handset Cable - 1 -...

  • Page 8: Assembling The Phone

    IP Video Phone Getting Started  Ethernet Cable  Quick Installation Guide & Quick Reference  CD Content Please unpack the product package with caution; inspect the items closely. If you find any damaged item, please contact your IP Video phone reseller immediately. Also, please keep the box and packing material for future use in the event of future shipments.
  • Page 9 IP Video Phone Getting Started Headset is not included in the packing list. Should be purchased separately.  Connect Network and Power There are two ways for network and power source connections. You can connect the phone to the AC Power directly using the power adapter or to a PoE compliant switch or hub.

  • Page 10: Configuration And Registration

    IP Video Phone Getting Started Configuration and Registration Configuring via Web Page Press <OK> button on the keypad of the phone to enter the status page and find out the IP address of the IP video phone. Enter it (for example http://10.1.3.204) into the address bar of web browser. The default login name and password are admin/admin.

  • Page 11: Overview

    “LED Instruction”. Indication LED Power Indication Indicates the power supply status. When VP-2009(P) Elite is powered on, the indicator is on.  When VP-2009(P) Elite is powered off, the indicator is off.  On the video conversation, open or close the local video.

  • Page 12: Led Instruction

    IP Video Phone Overview Description Answers an incoming call. On the dialing page or conversation page, press this key to change Speaker the conversation mode. Enable or disable DND function. Enter the contact page. Contact Navigation Key Includes four arrow keys (up, down, left, and right), and one <OK> key.
  • Page 13 IP Video Phone Overview Table 3-4 ICON instruction Icon Description Network Status: Available Network Status: Unavailable Network Status: Limited Flashes when the internet is disconnected. Account register successful or the DSS key set as line, and the line is registered. Account register failed or the DSS key set as line, and the line is unregistered.
  • Page 14 IP Video Phone Overview User and Administrator Mode Your phone can be used in user or administrator mode. Administrator mode is the default setting with full configuration rights. The default administrator password is admin. The default user password is user. - 8 -...

  • Page 15: Customizing Your Phone

    IP Video Phone Configuring VP-2009(P) Elite Customizing Your Phone Powering Up the Video phone Step 1 Plug a Network cable into the network port. Step 2 Plug in power. Step 3 It takes about 2 minutes to boot up the video phone. During this period, please do not touch any keys or turn off the video phone.

  • Page 16: Main Menu

    IP Video Phone Configuring VP-2009(P) Elite Area Description Use the clock to display the current time，user can use fingers drag this clock, placed it at any position of this interface. Display the Quick function keys. The default is “History”, “Directory”, “Message” and “Setting”.
  • Page 17 IP Video Phone Configuring VP-2009(P) Elite Menu Interface Second level submenu Message ---- Play  Photo Manager  Play Media  Video Manager  Contact Picture ---- IPCamera01  IP Camera IPCamera02  Application DP 1  Door Phone DP 2 ...

  • Page 18: Picture Dial

    For more information, please refer to Dial”. Figure 4-3 Picture dial DSS Key VP-2009(P) Elite provides Direct Station Selection (DSS) keys. You can assign various functions to DSS keys for “DSS using these functions quickly. For more information you can refer to Key”.
  • Page 19 IP Video Phone Configuring VP-2009(P) Elite Figure 4-4 DSS key - 13 -...

  • Page 20: Configuring Vp-2009(P) Elite

    IP Video Phone Configuring VP-2009(P) Elite Configuring VP-2009(P) Elite Setting Interface User can configure many functions, such as: Account, Network, Call Feature, Display, Date & Time, Sound, Security, Personalize, Reset, Reboot and Calibration, To access the Setting page, proceed as follows: Step 1 Press the Left/Right navigation key in the standby state to switch to the Main Menu.

  • Page 21: Set The Network

    IP address or domain name of the SIP server that is specified by the VoIP service provider. --Port Port number of the SIP server. The default value of VP-2009(P) Elite is 5060. Enable STUN Whether to activate the STUN Server.

  • Page 22: Set The Display

    IP address, subnet mask, gateway, and DNS server information. PPPoE If the xDSL modem is used, you can connect VP-2009(P) Elite to the network in PPPoE mode. For details about the user name and password, contact the network service provider.

  • Page 23: Setting The Date And Time

    Step 4 Select a setting mode as required. NTP Mode  VP-2009(P) Elite automatically obtains the Universal Time Coordinated (UTC) time from a dedicated NTP server. User must enter the Time Server in the field. Manual Mode  You need to use navigation keys to manually set the time and date.

  • Page 24: Setting The Ring Tone

    To set the displayed time format of your phone, 12-hour and 24-hour respectively. NTP Mode Whether to activate the NTP mode. If choose enable, VP-2009(P) Elite automatically obtains the Universal Time Coordinated (UTC) time from a dedicated NTP server. --Time Server IP address of the NTP server that provides the UTC time.

  • Page 25: Manager The Ringtone

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-5 Tones and volume Manager the Ringtone Users can make operations including the audition, deletion and import of the ringtone documents, proceed as follows: Step 1 Access the Settings page. Step 2 Click [Sound].

  • Page 26: Setting The Password

    IP Video Phone Configuring VP-2009(P) Elite The phone will ring when the cursor moves to whichever a ringtone document for your convenience. Only within the limits of authority can users delete the uploading ringtones. You can consult your system administrator for more details regarding the allocation of the limits of authority.

  • Page 27: Set The Language

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-7 Admin password Set the Language To configure the Language on the LCD, proceed as follows: Step 1 Access the Settings page. Step 2 Click [Personalize] Step 3 Select a required language and click the <Save>.

  • Page 28: Reset To The Factory

    IP Video Phone Configuring VP-2009(P) Elite Reset to the factory When there is something wrong or irrational with certain functional configuration of the phone, you can choose the factory reset to resume the initial configuration. To reset to the factory, proceed as follows: Step 1 Access the Settings page.

  • Page 29: Screen Calibration

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-10 Reboot Screen Calibration To Screen Calibration, proceed as follows: Step 1 Access the Settings page. Step 2 Click [Calibration]. Step 3 A dialog will be popped up to check whether to begin the calibration. Click the icon to confirm the calibration operation;...

  • Page 30: Call Feature

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-11 Screen calibration Call Feature Users can configure the call function through the option interface. The functions can be configured are as followed: DSS key, Picture Dial, Voice Mail, Hotline, Forward, Call Waiting, Auto Answer, Video, TV output, Key As Send and Anonymous Call.

  • Page 31: Dss Key

    Configuring VP-2009(P) Elite DSS Key VP-2009(P) Elite provides Direct Station Selection (DSS) keys. You can assign various functions to DSS keys for using these functions quickly. Each DSS key can support 4 functions: line, speed dial, BLF, BLF list. When you set DSS Key as Speed dial, BLF and BLF List function, the DSS Key will turn green or other color.

  • Page 32: Parameter Description

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-14 DSS key setting Table 5-4 The parameter specification chart of each option Parameter Description DSS Key 0X To display the serial number of the DSS Key. Type To choose what function the required DSS key to be set. The default type is “N/A”, namely no function set.

  • Page 33: Picture Dial

    IP Video Phone Configuring VP-2009(P) Elite To set the DSS Key as BLF, proceed as follows: Step 1 Click the “Type” option, and then choose “BLF” option in the pull-down menu; Step 2 Choose the line to be configured in the pull-down menu of the “Line” option. If you choose “Auto”, the default account at present is adopted;...

  • Page 34: Voice Mail

    Provision”. Voice Mail The voice mailbox is stored on the Media Resource Server (MRS). You can use VP-2009(P) Elite to connect to the server to obtain voice messages. After receiving a new voice message in the standby state, VP-2009(P) Elite displays a notification on the screen. If you have configured a voice mailbox access code, click the icon to access the voice mailbox.

  • Page 35: Forward

    Figure 5-17 Hotline Forward VP-2009(P) Elite supports three call forward modes: Always Forward, Busy Forward, and No Answer Forward. If auto-forwarding is under no requirement, you can forward your call to a third party through manual operation. To configure the call forward function, proceed as follows: Step 1 Access the Call Feature page.

  • Page 36: Call Waiting

    Configuring VP-2009(P) Elite Figure 5-18 Forward setting If you enable the automatic forwarding function, the VP-2009(P) Elite automatically forwards incoming calls based on the preset forward type. If you enable the manual forwarding function, you can forward an incoming call by clicking and entering the forward-to number.

  • Page 37: Auto Answer

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-19 Call waiting Auto Answer Users can answer calls automatically through the set type of Auto Answer. It supports 4 types: Directly, After 5 seconds, after 15 seconds, and After 30 seconds. The phone supports the individual configuration of each distinct account.

  • Page 38: Video

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-20 Auto answer Video Users can set the call type through this option, e.g. the default call type is video call or voice call, and whether the Local Video is enabled. The settings include the Bandwidth and Frame Rate. The phone supports the individual configuration of each distinct account.

  • Page 39: Tv Output

    Figure 5-21 TV output Setting the Send Key VP-2009(P) Elite allows you to set a key such as the pound key (#) or start key (*) as the send key. By default, the pound key (#) is used. To configure the key as send function, proceed as follows: Step 1 Access the Call Feature page.

  • Page 40: Anonymous Call

    IP Video Phone Configuring VP-2009(P) Elite Figure 5-22 Key as send Anonymous Call If Anonymous Call is enabled, the phone of the opposite side cannot display your name when you make a phone call. You can also enable the Anonymous Call Rejection. When an anonymous call is coming, the phone will automatically reject it.

  • Page 41: Directory

    Figure 5-23 Anonymous call Directory Address books on VP-2009(P) Elite stores contact information. You can add, edit, delete, call, or search for contacts. You can also add, edit or delete the contacts group. To access the Directory page, proceed as follows: Step 1 Press the Left/Right navigation key in the standby state to switch to the Main Menu.

  • Page 42: Adding A Contact

    IP Video Phone Configuring VP-2009(P) Elite Black List and Anonymous defaulted by the system can only be operated the ringtone change without being conducted the operation of deleting and renaming. Adding a Contact To add a contact, proceed as follows: Step 1 Access the Directory page.

  • Page 43: Adding/Deleting/Clearing A Blacklist

    Remote Phonebook Please refer to the “Directory” section for the instruction of the remote phonebook. Each VP-2009(P) Elite is configured with a local address book. A public address book is required for all phones in an enterprise. After a remote phonebook is enabled, users can access the remote phonebook. When the remote phonebook is set on the phone, click it and the phone will download and display the contact information through the server.

  • Page 44: Deleting The History Record

    IP Video Phone Configuring VP-2009(P) Elite Step 2 Click [Call History]. To choose the Call History Type page, proceed as follows: Step 1 Enter into the Call History page, Press the Left/Right navigation key to switch the type. To choose the Call History Record page, proceed as follows: Step 1 Enter into the Call History Type page, Press the Up/Down navigation key to select the record.

  • Page 45: Contact Picture

    IP Video Phone Configuring VP-2009(P) Elite Step 3 Click [Play], the phone will Automatic play the video, you can press any key to exit. Step 4 Click [Manager] enter into the manager page. You can preview, delete and enter into the USB device to import the video.

  • Page 46: Door Phone

    Door Phone The phone can control the door phone to open the door. When door phone dials the VP-2009(P) Elite, user can see the video during the conversation , also can press the <Open Door> to open the door.
  • Page 47 IP Video Phone Configuring VP-2009(P) Elite Parameter Description Phone Number To input the phone number of Door Phone. For more information you can consult your system administrator. Unlock Pin To set the password corresponding to the Door Phone. If the door phone has been set a password, when you want to open the door, you must input the password at first.

  • Page 48: Configuration Using The Web Browser

    Connect VP-2009(P) Elite and the PC to the same network where they can communicate with each other.  You can connect VP-2009(P) Elite and the PC to a Hub or a switch. If there is no Hub or switch, connect the PC to the PC port on VP-2009(P) Elite.

  • Page 49: Status Tab Page

    Security: changes the password and uploads security certificate for the TLS/SSL client and server. Status Tab Page On the Status tab page, you can view VP-2009(P) Elite's network and version information, as shown in Figure 6-2. Figure 6-2 Status tab page...

  • Page 50: Account Tab Page

    Configuration Using the Web Browser Account Tab Page Account On the Account tab page, you can configure information for a VP-2009(P) Elite's account such as registration and deregistration, as shown in Figure 6-3: Figure 6-3 Account tab page Table 6-2 Parameters on the Account tab page...
  • Page 51 Local Video Set enable or disable the local video when user during the Video conversation. Missed call log Whether to record missed calls. If you select Disabled, VP-2009(P) Elite does not record calls that you miss. - 45 -...
  • Page 52 Table 6-3 Parameters on the Voice tab page Parameter Description Disable codecs Disabled voice coding types. VP-2009(P) Elite supports the following coding types: PCMU, PCMA, G.723, G.729, G.722, GSM, AACLC and iLBC. Enable codecs Enabled voice coding types. The types are listed in descending order of priority.
  • Page 53 Table 6-4 Parameters on the Video tab page Parameter Description Disable codecs Disabled video coding types. VP-2009(P) Elite supports the following coding types: H264, H263 and mp4v-es. Enable codecs Enabled video coding types. The types are listed in descending order of priority.
  • Page 54 Interval for sending UDP messages. For example, 30 seconds. Interval RPort Port through which the server sends a response to VP-2009(P) Elite. Details about this parameter are specified in RFC 3581. Login Expire If a user does not perform any operations within the period specified by this parameter, logs the user out.Unit: second...
  • Page 55 IP Video Phone Configuration Using the Web Browser Parameter Description SIP Session Timer Round trip time (RTT) between the server and the client. If the network latency is long, set it to a greater value. Details about RTT are specified in RFC 3261. Default value: 0.5 SIP Session Timer Interval between the INVITE response receiving and the...

  • Page 56: Network Tab Page

    IP Video Phone Configuration Using the Web Browser Parameter Description SRTP Whether to enable or disable Secure Real-time Transport Protocol BLF List URL To input the BLF list server’s URL BLF List Code To input the BLF list feature code. BLF Subscribe Validity period for the BLF subscription time.
  • Page 57 --Secondary DNS IP address of the secondary DNS server. PPPoE If the xDSL modem is used, you can connect VP-2009(P) Elite to the network in PPPoE mode. For details about the user name and password, contact the network service provider.

  • Page 58: Phone Tab Page

    IP Video Phone Configuration Using the Web Browser The value Enabled indicates that the VLAN function is --VLAN enabled for the Internet port. ID of the VLAN where the IP phone belongs to. The network administrator divides the network where the --VID switch resides into multiple VLANs.
  • Page 59 Server time. Update Interval Interval at which VP-2009(P) Elite obtains the UTC time from the NTP server. Choose the idle status If you did not press any digit key on the dial-up status, the phone will turn to which one. (Include DSS Main Desktop Key Desktop、...
  • Page 60 Number that incoming calls are forwarded to. Busy Forward Whether to enable the busy forwarding function. If you select On, VP-2009(P) Elite forwards incoming calls to the preset number when VP-2009(P) Elite is in a conversation and does not enable the call waiting function. Target Number that incoming calls are forwarded to.
  • Page 61 Account that you configure a function for. Label Self-defined function name, which is displayed next to the corresponding DSS key on VP-2009(P) Elite. Only the speed dial and BLF can input. Value Setting based on the functions that you assign. For example, if you assign the speed dial function to a memory key, enter the speed dial number in the Value text box.
  • Page 62 Replace rule: VP-2009(P) Elite allows you to replace a complex number with a simple number. For example, after you replace 0123 with 12, VP-2009(P) Elite makes a call to 0123 after you enter 12. The phone supports this rule of each distinct account.
  • Page 63 Dial-now rule: After you enable this rule, VP-2009(P) Elite makes a call as soon as you enter the preset number. For example, if you set Dial-now Rule to 0147, VP-2009(P) Elite makes a call to 0147 for the setting time after you enter 0147.
  • Page 64 IP Video Phone Configuration Using the Web Browser Figure 6-13 Dial-now rule Door Phone Figure 6-14 Door phone - 58 -...
  • Page 65 IP Video Phone Configuration Using the Web Browser Table 6-12 Parameters on the Door Phone tab page Parameter Description Door Phone List Select a Door Phone which you want to configure in this list. Device Model Select the device model Display Name Set the display name which you want to display.

  • Page 66: Contacts Tab Page

    IP Video Phone Configuration Using the Web Browser Access PIN To input the PIN depends on IP Camera. For more information you can consult your system administrator. If the IP Camera hasn’t been set a PIN, user can see the video directly. If the phone has been set a PIN, user must input the PIN at first.
  • Page 67 Configuration Using the Web Browser Remote PhoneBook Each VP-2009(P) Elite is configured with a local address book. A public address book is required for all phones in an enterprise. After a remote address book is enabled, users can access the remote address book.
  • Page 68 IP Video Phone Configuration Using the Web Browser Figure 6-18 LDAP page Table 6-14 Parameters on the LDAP tab page Parameter Description LDAP Whether to enable or disable LDAP. LDAP Name To input the LDAP name. LDAP Name Filter Name filter. After you enter a name, the IP phone uses the name filter to search the LDAP server for the contact.
  • Page 69 IP Video Phone Configuration Using the Web Browser Server Address IP address or domain name of the LDAP server. Examples are as follows: 192.168.1.100 lday.company.com Port Port number of the LDAP server. Default value: 389 Base Root directory that the IP phone searches. For example, if the value is dc=Redmond, dc=wa, the root directory is wa\Redmond.

  • Page 70: Upgrade Tab Page

    LDAP server for the characters that a user dials. Upgrade Tab Page Basic setting On the Basic tab page, you can restart VP-2009(P) Elite, reset the VP-2009(P) Elite to factory and upgrade etc.  To reset VP-2009(P) Elite to the factory settings, click the Reset To Factory an...
  • Page 71 IP Video Phone Configuration Using the Web Browser Figure 6-20 Upgrade advanced page Table 6-15 Parameters on the Advanced tab page Parameter Description PNP Active Whether to enable or disable PNP. PNP(Plug and Play) provides a proprietary method to enable "Auto Provisioning". DHCP Active Whether to enable or disable DHCP.

  • Page 72: Security Tab Page

    IP Video Phone Configuration Using the Web Browser Power On Whether to enable or disable auto provision once the phone is power on. Repeatedly Whether to enable or disable auto provision with the interval configured. Interval(Minutes) Set the interval time. Weekly Whether to enable or disable auto provision in the configured period.
  • Page 73 IP Video Phone Configuration Using the Web Browser Trusted Certificates To upload a trusted certificate, proceed as follows: Step 1 Click Browse in the Trusted Certificates area and select a trusted certificate in the dialog box that is displayed. Step 2 Click Upload.

  • Page 74: Saving Settings

    IP Video Phone Configuration Using the Web Browser Figure 6-23 Server certificates Saving Settings Click the Submit button on the lower-part of a page after setting is completed. - 68 -...

  • Page 75: Using Vp-2009(P) Elite

    The <SPK> key is used to switch the headset mode and hands-free mode. Multiple Accounts VP-2009(P) Elite supports four independent SIP accounts. If multiple accounts are enabled, corresponding account names are displayed on the standby screen. You can click the account to select an account. After an account is selected, the dial page of the corresponding account will be displayed.

  • Page 76: Redialing

    Using the IP Address to Make a Call You can use the IP address of VP-2009(P) Elite to make a call to an IP address in the same LAN or VPN. For example, you can use 10.10.10.1 to make a call to 10.10.10.2.

  • Page 77: Answering A Call

    Using VP-2009(P) Elite Answering a Call Answering a Single Call In the standby mode, VP-2009(P) Elite receives an incoming call and starts ringing. To answer the call, pick up the handset, press the <SPK> key or click Answering Multiple Calls Step 1 In the standby mode, VP-2009(P) Elite receives an incoming call and starts ringing.

  • Page 78: Three-Party Conference

    After the BLF function is assigned to a key, you can learn about the status of other accounts (idle, ringing, or occupied) on VP-2009(P) Elite. You can directly press the key assigned with the BLF function to make calls. This requires the support from the server.

  • Page 79: Blf List

    IP Video Phone Using VP-2009(P) Elite Table 7-2 Status on DSS Key menu Status Description The listened-on account is in the idle. The listened-on account is in the talking state or in the dial status or in the ringing state...

  • Page 80: Maintaining Vp-2009(P) Elite

    IP Video Phone Maintaining VP-2009(P) Elite Maintaining VP-2009(P) Elite Restarting VP-2009(P) Elite Users can restart the phone via phone or web interface. Restart the phone via phone interface, please refer to “Reboot”.  “Basic setting”  Restart the phone via web interface, please refer to on the Upgrade page.
  • Page 81 IP Video Phone Maintaining VP-2009(P) Elite The manual is only for reference, please take the object as the standard. We reserve the right to improve or change the product and the user guide without notice. 2011-8-11 - 75 -...

This manual is also suitable for:

Vp-2009p

Table of Contents